Sari la conținut
ELFORUM - Forumul electronistilor

Sharp 81FW-57E chassis DA-100W ??


Vizitator

Postări Recomandate

Am urmatoarea problema ,am reparat tv (dupa ce mi-a defectat BU2525 de vreo 2 ori ) si dupa ce l-am inchis nu a mai vrut sa porneasca,m-am uitat sa nu fie vreo cupla iesita dar sint toate la locul lor.Porneste BO pentru 2-3 sec si se opreste iar LED-ul verde din fata clipeste de 9 ori.Ma poate ajuta cineva cu un sfat sau cu un manual care sa cuprinda si LED fault code table.Multumesc anticipat.

Link spre comentariu
  • Răspunsuri 3
  • Creat
  • Ultimul Răspuns

Top autori în acest subiect

  • Tavi

    1

Top autori în acest subiect

[email protected]

 

Adresa de unde se pot lua buletinele (nu stiu cum se obtine contul ) este http://www.tradenet.sharp.co.uk/tech

 

In buletinele lor service scrie,cel de jos este prima pagina pentru SHARP DA100 (50Hz) Chassis

 

Issue: March 2001

Classification: White

TELEVISION TECHNICAL BULLETIN Page 1 of 12

Sharp Electronics (UK) Limited

Revision 8

White – Carry out as required

Yellow – Carry out as required and whenever the unit comes in for service

Red – Carry out on all units

MODELS 56FW53H 66FW53H 66FW54H 76FW53H

76FW54H 59ESD7H 66ESD7H

 

Power and other faults experienced on the DA100 (50Hz) Chassis

The following faults have been experienced on the DA100 (50Hz) chassis (see models

listed above).

When servicing any model fitted with a FW chassis, ensure that the internal speakers

are connected.

1. Fault finding flow chart. (See page 2)

2. LED fault code table (See page 4)

3. Set may not turn on, when it does there is a rainbow effect on the screen. (See

page 5)

4. Very high HT in excess of 200V. (See page 6)

5. Field fold over at the bottom of the screen after about fifteen minutes. (See page 7)

6. Receiver does not come out of standby or operation erratic. (See page 7)

7. Receiver does not come out of standby - power supply inoperative. (See page 8)

8. Receiver intermittently returns to standby or intermittently does not come out of

standby. (See page 8)

9. Loss of remote control functions and front buttons after five minutes. (See page 9)

10. Blank raster. (See page 9)

11. Doughnut effect on the screen (purity error). (See page 10)

12. Intermittent whistle or speaking from speakers. (66FW53H, 66FW54H, 76FW53H,

and 76FW54H only) (See page 11)

13. No operation (76FW53H and 76FW54H only) (See page 11)

14. Set trips once picture appears. (Only 66FW54H & 76FW54H) (See page 12)

Link spre comentariu
  • 3 săptămâni mai târziu...

Creează un cont sau autentifică-te pentru a adăuga comentariu

Trebuie să fi un membru pentru a putea lăsa un comentariu.

Creează un cont

Înregistrează-te pentru un nou cont în comunitatea nostră. Este simplu!

Înregistrează un nou cont

Autentificare

Ai deja un cont? Autentifică-te aici.

Autentifică-te acum



×
×
  • Creează nouă...

Informații Importante

Am plasat cookie-uri pe dispozitivul tău pentru a îmbunătății navigarea pe acest site. Poți modifica setările cookie, altfel considerăm că ești de acord să continui.Termeni de Utilizare si Ghidări